Originally Posted by
NomakeWan
Then I hate to have to yet again be the bearer of bad news, but this version actually managed to leave my 94's PCM in a hung state. Not unrecoverable--I just yanked the ECM fuse to clear the RAM and was back in business. But in a state where the E-side was stuck and the T-side wasn't, and the PCM was no longer talking over the serial bus to any devices (including the ABS/ASR and the digital dash).
I did confirm however that Flashhack is automatically detecting the FTDI interface by not touching the config section.
As always, log is attached. It took forever to connect initially, then once it connected all seemed well. I then tried to unload the kernel and things went bad. It wouldn't let me reattempt to unload unless I loaded again, so I did that, then attempted to unload. After that second attempt, the PCM stopped communicating entirely.