Looks easy enough. i'll give it a shot then just save the xdf as EEhack 2bar.
Printable View
If anyone wants to try this i just copied Cats columns like SteveO said.
looks good
Preface: 1995 Caprice Classic LT1.
Here's a connection log (verbose) WITHOUT removing the 3 fuses I mentioned earlier. This is simply plugging it into the car and trying to connect.
I am able to use this program to flash bins to the car once I remove the fuses. TunerCat's flash program nuked my spare PCM, so eeHack has become my primary flasher.
That being said, I noticed that when I was flashing a tune today, the program connected, fans kicked on and off, then the purge valve cycled every second or so - all the way through the flash routine. No errors in the process and the car seems to run fine now. Purge valve stopped cycling once the process completed.
thats normalQuote:
That being said, I noticed that when I was flashing a tune today, the program connected, fans kicked on and off, then the purge valve cycled every second or so - all the way through the flash routine. No errors in the process and the car seems to run fine now. Purge valve stopped cycling once the process completed.
i would just like to bump this thread and say that development still kinda continues, despite me not even having a car (all bikes)
currently i'm working over some stupid bugs in the last release, and maybe will implement a fuel economy parameter. we'll see.
Any chance of getting the part where you can add the ram/gibberish to the bin being pulled fixed? It's not adding the ram part. Thanks Jonathon
i rewrote the 'settings and config' library a while ago. been notified that the 'silence extra modules' is not working properly either. probably botched that setting too, i'll look at it.
ok i figured out the extra error counts on connect, the dump ram not working, and the silence extra modules not working.
there's still a weird bug i can't figure, some users report (and i even have a youtube video) of closing and re-opening the datalog window while data is playing causes the datalog display to go blank? i can't reproduce it on my machine or seem to find a cause...
... also any feature requests or anything? i hate to push out a release for three bug fixes...