PIP/Spout? those are ford-specific terms.... ???
Printable View
PIP/Spout? those are ford-specific terms.... ???
Still would be easier if we could just do software...
Here's some samples of DIS primary and secondary. Zip is higher resolution without forum optimization.
I haven't abandoned this project. A few pics of some online information I've been gathering. I'm wanting to better understand how the crankshaft position sensor works. Seems maybe a modified harmonic balancer or a bolt-on harmonic balancer mounted trigger wheel might be an option to use a factory definition file. I'm thinking I could bench test a trigger wheel similar to way I bench tested the '0411 trigger wheel (see attached pic).
Maybe I'll need to have the trigger wheel 2x for a V8? Maybe I could have DIS with a V8, waste spark?
dave w
Maybe this info is of interest
https://www.megamanual.com/ms2/GM_DIS.htm
Attachment 18564
I seen a write up on a fiero forum where a guy had his balancer machined at a machine shop to match this and used a Ford crank sensor to swap dizzy for dis.