Anyone done any turbo boost table tuning on one of these trucks? I would like to at some tables to see where changes where made.
Printable View
Anyone done any turbo boost table tuning on one of these trucks? I would like to at some tables to see where changes where made.
This is very accurate. Most cold start issues are due to injectors and pump wear. You can add pulse width and basic timing advance during cranking but you are just masking mechanical issues 99% of the time. Poor atomization from old injectors on these is usually the problem. And shoving more fuel in at 22:1 compression on a cold start doesn't fix it. If you have good parts and lowered compression, having to make changes is a different story.
Here is a new XDF.
Added Transmission Tables:
Kickdown Shift MPH
Downshift Modifer vs APP
Upshift Modifer vs APP
Cold Engine Prevent Overdrive CTS thresholds
I haven't fully figured out the usage of the modifier tables but they are all set to zero in the bins I have.
And another.
Added Kickdown Mode Enable/Disable vs APP
Re-added checksum correction that somehow was lost.
hi i was wondering if you still any of the files for 1995 6.5 diesel to get into the pcm. im running tunerpro rt.
Stevtatt07: Sorry I replied to you on another forum and pointed you to this thread, didnt realize you were already here. My mistake.
What can we help you with? the xdf you need is in the post above your's, the BPAA bin? you can get it from dripspeed or read your own, mine wasnt a BPAA so I just grabbed it from dripspeed, its a good bin and works.
UDL
oh ok im not sure how i missed that thank you.
I'm searching for BIN file
4056
BKWB
3342
I've found 6.5 diesel bin files collection somewhere, but i've lost it :(
Can anybody help me?
PCM 16183977
Can I use BPDP instead of mine bin? (Blazer '94 2dr)