Originally Posted by
Kitch
Had a very quick look at the Bluecats software, looks very good but I will concentrate on tuning the engine before I get right into trans control.
I found a couple of things I could look at changing, one was the "Upshift RPM vs shift" at present it looks likes it's set at 4000 RPM, was that the parameter you were referring to?
The other one I found was in the "Upshift/Downshift MPH vs TPS" table, I was thinking about raising the 100% TPS upshift values by 5 MPH, what are your thoughts on that one?
I have a set of Comp Cams 1.6 roller tip rockers but the aren't the self aligning type so they're no good for the stock L05.
I do have the new factory roller cam and lifters that came out of my L31 that I could put into the L05 but I would need to buy a spider plus cam thrust plate for the L05 and then possibly drill and tap the holes in the block to suit. I'm not really sure if I would get much of a gain from the L31 cam, although a roller cam is always nice.