I've seen it both ways, is it a p01(red/blue) or p59(blue/green)?
Printable View
I've seen it both ways, is it a p01(red/blue) or p59(blue/green)?
VIN 6G2VX12G44L308172
dave w
what is the transmission called? nv 4500, nv3500? type? 4,5, or 6 speed? factory or after market?
escalade 2004 4wd
7603 OS
Looking for an 04 7603 OS for 6.0L and manual transmission please. I have one for the 4L65E from a Yukon Denali. Not sure what parameters to change in TunerProRT so would like to compare. I did compare the OS I have against same OS for 04 Corvette M6 and matched all the transmission scalar, flag, dtc settings. Not sure if that's good enough.
Just to add to the collection.
'7603
'04 Z66 Avalanche
5.3l LM7
4L60E
Original un-molested file attached.
I found this to be all engine calibration segments for 7603 OS.
There are not confirmed but size and identifiers matches, so use on your own risk.
There is also some 5.7l segments.
A little late to the party, but I have a .bin out of my 04 4.8 5 speed! Hopefully this helps someone :thumbsup:
2004 GMC ENvoy 5.3 LM4 OS 12587603
hi I cant get the 04 Chevy 1500 4x4 LR4 NV3500 bin file to download posted by foxracing254. does anyone have working copy of this file they could repost, thanks.
2004
[ATTACH]18663[/ATTACAttachment 18664
OS 12587603 P59. Stock 2004 vette tune T56 standard trans Segment swopped Engine ID from active flex 2004 Taho. Vin was changed to 2002 Vette when P59 ECM upgrade.
OS 12587603 P59. Stock 2004 vette tune 4L60E Segment swopped Engine ID from active flex 2004 Taho. Vin was changed to 2002 Vette when P59 ECM upgrade.
HP Tuners files of each see .hpt
Correct, like Pulse_GTO said the PO1 is 512kb and the P59 is 1meg. So you would not be able to to fit it onto a PO1 ECM. PCM Hammer wont allow putting any P59 onto a PO1 or vice versa even though the PO1 is a smaller tune. That is one of the reasons I changed to the P59 from the PO1. The P59 is larger & a faster processer. It did entail rearranging several of the ECM pins from my 2002 vett harness ECM plug to correspond to the correct P59 outputs. But for those who have 2004 / P59 GM ECM'S this will quickly get you going with FLEX fuels or Boosted applications
yes it does
Which xdf/bin file should I use for an 04 tahoe 5.3? flex fuel I believe.
Not sure how usable this file is to anyone, but here is the BIN file from my 2004 GMC Envoy, P10 PCM.
I'm hoping someone can help me out i been looking at the bin files but I'm unsure if any of them will help me out. just a little background info on what I'm doing first. i got a DBW 2004 chevy avalanche 4x4 non flex LM7 5.3 engine from a junk yard with computer everything is stock and i got it running in a G-body Oldsmobile with a th400 transmission. the xdf file im using is 12587603 and its not correct for tuner pro (serv.no 12586242) so im limited in what im seeing and what i can do. so can i use a different lm7 5.3 bin file that has the correct xdf ? my goal here is to get everything set with flex fuel with a non electronic transmission and be able to use my radiator fan turn on and off. i already tried to turn off the transmission in tuner pro but still get error codes from the computer
Didn't see this one on here.
hi im looking for any 05 2500hd lly files or tunes out there that i can refer to thanks
Here's a 6.0 with 4L80E
Express 2500 van
7603 OS
VIN 1GCGG25U441181668
12587603 OS already setup for an DBC/IAC 4.3L V6. Dumped and unchanged from an junkyard ECU