Just need 2. I had the complete pigtail and did not want to strip it down. So I just plugged in all of them... :rolleye:
Printable View
Just need 2. I had the complete pigtail and did not want to strip it down. So I just plugged in all of them... :rolleye:
Thanks...I need to purchase the ALDL interface for the bench harness and PC - will either of these work for my 95 LT1 flash:
Moates
http://www.moates.net/aldu1-and-cabl....html?cPath=64
Red Devil River
http://www.reddevilriver.com/aldl.html
Yup! So will Roberts!
http://www.gearhead-efi.com/Fuel-Inj...uy-ALDL-Cables!
Some of the 95 LT1 had a OBDII 16 pin port. OddBall! Still OBDI and if you have one and don't want it, you can wire in a OBDI port.
Then you'll have an oddball OBDI cable that is barely ever used... or change out your OBD port to a 12 pin for about $2-12 dedending on JY or new.
i may have a decent workaround for that, Mark.... need to verify some pinouts first, IF it will work, it will keep everything nice and modular for a relatively small change in price.