-
IT WAS MY D@MN ROTOR!!!!
I have a buddy here in town that has another AMC 360 so I took my cap/Rotor/wires, and adapter (we run the Ford Duraspark wide cap) and went to his house. Intalled my cap/wires, his truck fired right up. I installed my rotor and adapter, his truck would barely start. Put all his parts back on except left my rotor and it backfired and sputtered just like mine. So I took all my parts home and borrowed his rotor and put them on my truck. It fired right up and ran like a champ!!!
Now on to tuning! It was in closed loop pretty much the whole time and that is new too. WOO HOO!!! Thanks everyone for helping out!
-
Awesome, I've seen quite a few that burn a minuscule hole through the rotor and sometimes idle fine but under load it takes the fire right to the shaft. Good testing. :thumbsup:
-
2 Attachment(s)
Check this out! this is what the killer was! The indexing tab INSIDE the rotor was off about 10 dergrees! Here's the bad one:
Attachment 14378
Here's the good one:
Attachment 14379
-
WOW, nice catch! :rockon: Which brand is which?
-
I have NNNNNooooo clue. I bought the bad one about a year ago and it was sitting on my shelf. The good one was my buddies he got from a wrecking yard.