What exactly is the 'port fuel mod' ?
Printable View
Please see attached MPFI Information.zip file. It's a "How To" for converting a 16197427 computer for "port fuel mod".
The EBL System works great for MPFI, but does not control an Electronic Transmission (4L60E / 4L80E).
For the DIY type, converting a 16197427 to MPFI is considerably less expensive than an EBL System, with the added ability to control a 4L60E / 4L80E.
dave w
I agree with that. However depending on what the plans are the EBL has other functions. 2 bar MAP sensor. VAFPR compensation. Nitrous control. Alpha-N fueling. Lean cruise and more. The datalogging and VE correction are also alot more straight forward. It also has a built-in flash bank that allows you to tune on the go.
I may end up going this route or something close to it. I even considered using the MPI spider with a few modifications to fit in the nitrous bosses of my air gap intake. Would have to look closer at it to see if it would be feasible, or if I could even get the injectors to spray in the rite direction but it would be an interesting setup.
Quote:
I am considering selling my Edelbrock 3505 Vortec MPFI intake and Holley 670 throttle body and running something that self learns.
The original self-learning power management system:
https://static01.nyt.com/images/2018...ebookJumbo.jpg