Originally Posted by
JeepsAndGuns
Going bigger. My future build for this jeep is as follows, (and I already have the listed parts)
High pinion driver side drop, kingpin dana 60 front axle (need to buy locker and finish rebuilding)
Smooth bottom, factory disc brake dana 60 rear (need to buy gears and lockers)
Early chevy NV4500 trans, with the lower 6.34 first gear (I have completely rebuilt it)
NP-205 transfer case, driver side drop ford version (completely rebuilt)
SOA on the front, shackle inversion on the rear (for about 7 inches of lift on stock springs)
35x12.50-16.5's BFG MT's (bought used, but nearly 95% thread)
Re centered hummer 12 bolt beadlock wheels, pvc beadlock rings. (need to cut out old centers and weld in new ones)
I will be running 5.13 gears, and lockers front and rear.