Printable View
Hello,
New to the forum and tuning in general so cut me some slack :) I built an 86 iroc with a 305 TPI 5 speed manual trans. Borg warner 3.45 rear. I have the BCC AKFX 2427 for the 165 ecm. The closest one i could find is AKFT. Does anyone have the AKFX available for download? The car runs pretty good considering it has a mild cam, vette heads and full exhaust but it needs tweaking so i want to get the closest bin i can to what i already have. Any help would be greatly appreciated. Thank you!!
your BCC may have been superseded. Maybe someone (EagleMark) can explain where they find out if its been updated.
Well if you have it you can read it. But it was superseded (GM Upgrade for some reason) to ANPK so that would be a better start.
Ah ok, Thank you. I will download that bin and see if i can find any differences (if any) and see if the car runs with that one.
Sometimes a supercedded bin changes are not defined in the mask, therefore can not be found unless you read hex, dissasembly/hacks. But sure would be better start if GM found a reason to change it...
I have a 88 305/5spd w/3.45 AKFY bin and was unable to locate it for download also. Wound up buying the moates adapter and reading it from my chip
Well post it up and add it to the library! :thumbsup:
here it is
your welcome with the help on how too read ;)
File 'akfy.bin'
Address: 0xc000,0xffff
CRC: 0xb25b2c6e
Mask ID: 32b
ID byte: 0x32
Sum word: 0x70ef
Sequence: May 25, 1988 #4437 (05BC1155)
Scan ID: 2401
BCC: AKFY2436
It is now in the 32b info thread, saved forever! :thumbsup:
Tunerperformance did I get all the corrections done you told me about?
I will look it over soon mark, I have been busy. here is another to add ANYX .
http://www.sendspace.com/file/tsewa3
did anyone ever get a copy of the ANYX bin? I am still unable to find a copy
If mark didn't download it I can upload it again. Going too be out of town this weekend and can post on tuesday going to be on dial up. lol
Mark is behind, wife has been in hospitasl for a month, another surgery monday, my laptop died yesterday... so help as you can and when things slow down to normal hectic I will catch up.
You and you family are in our prayers Mark, hope all is well