-
2 Attachment(s)
7730 Pin-out
Does anyone have a Pin-out for a 7730 ECM and its corilation to the circuit board. I have a EBL P4 and someone already hardwired ADC channel #1, but I don't know what pin it is hooked to. I'm trying to hook up a WB 02 and want to know if I can use that pin or if I need to run another channel. Thanks in advance if anyone can give me some insight on this. Also I'm attaching a pic just in case I did not explain that very well. The white wire I circled comes From the ADC Channel #1.
-
Here's a thread @RBob started with your EBL P4. He should be able to help...
http://www.gearhead-efi.com/Fuel-Inj...M-ECM-Products
-
-
I believe there are also pinout diagrams in the fileman section as well.
-
Six-Shooter, thanks. I don't need an actual pin out, I needed to know where on the ECM circuit board each pin gets connected. I didn't get a full map but @RBob was able to help me with the pin in question.