Universal patcher question

Hey all, been lurking here for years n can't thank you enough for the vast knowledge you've all shared, I've learned a lot things without ever having to ask a question n truly wish I had something myself I could contribute
So my question is, I've been playing with the universal patcher, cool toy btw, but I was wondering if I could patch a 95 EE transmission segment into a 2156 OS? Getting ready to do the torque head swap on my LT1 in my s10, but have that 95 bastard year, I did buy a 96 valve body n spacer just in case, but honestly hoping not to have to open the transmission up, let alone pull it, any help would be greatly appreciated
Thanks Josh

Maybe someone else can confirm, but 95 has PWM and can run same program as later 4ll60

The 95 does have PWM tcc, they changed the 3-2 strategy to off/on from pwm in 1996, causing shift issues

Quote:

---

Originally Posted by jsimplex2

The 95 does have PWM tcc, they changed the 3-2 strategy to off/on from pwm in 1996, causing shift issues

---

I really don't know much about automatic transmissions, but would any of the parameters under "Transmission Calibration>General" in the attached XDF be helpful? I see that there is a flag for "3->2 Electronic Control Available" and also under "OS Hardcoded Parameters" there is a table called "Transmission Shift Solenoid Logic 4L60E". Hopefully this helps.

Thanks for the feedback, I'll dig into them and see if I can make something work