Connecting to a 16149396 $DF

I am having troubles connecting to a 16149396 $DF '93 3400 TDC/DOHC ECM. TP goes into a flashing red/blue on the connect status box

I am using the .ADX from the forum. http://www.gearhead-efi.com/Fuel-Inj...Information-DF I have also tried other versions of the 9396 .ADX files. The forum version goes red/blue. The other versions just stay 'connecting'.

I tried this on a 16149396 ECM from a '91 3.1 and got the same results.

In looking at troubleshooting this I tried on Real Term sending in hex

F4 57 01 00 B4


Each time the reply was


46 34 20 35 37 20 30 31 20 30 30 20 42 34 20

46 34 20 35 37 20 30 31 20 30 30 20 42 34 20

46 34 20 35 37 20 30 31 20 30 30 20 42 34 20

Any thoughts?

Hmmm? Not sure? With the way it was titled, "$DF-16149396-V1.adx" I have worked on it for someone and it would have to work for me to re-title and put in the thread...

Well I can take a look at the mapping out of the parameters ect, but where I am stuck is on it not connecting at all. What is it that TunerPro RT is looking for for it to connect?

i probably have a DF ADX laying around from when i was running the MC on it... it worked well last time i played with it(~2010).

Same results as the one on the board. I am going to re-examine wiring here and I will get back to you.

Thanks for the help.

..... what calibration is in that PCM? i wonder if someone swapped a 9396 in place of a 7727 but kept a non-DF MEMCAL in it.

I'm hooking up good now. One of the grounds was missing.

Thanks for the help!