Ok, so many of you may or may not know that i have installed a chevy 350 in a mazda miata with 2 eaton m90's strapped to it.
i have a 16196395 computer, moates g1 adapter, a N/A chip from mark, BURN2 unit, and an ALDL cable.
A little background about the engine:
Crate chevy 350/330hp
http://www.summitracing.com/parts/nal-19210008
blew it up, rebuilt it, converted it to TBI and added 2 blowers to it
No smog stuff, and no a/c ..... just the necessities to make it run [IACV, MAP, TPS, Coolant Temp, Oil Pressure]
t5 manual transmission
Right now it is on a 350 throttle body and 350 injectors..... believe its 61pph..... removed the OEM regulator and installed an aftermarket unit so i can adjust it.
2 bar map sensor
wideband o2
I now think that i am ready to begin tuning. The car runs and drives but i do NOT want to take it into boost until i know what im looking at and everything looks good.
I have tunerpro installed on my laptop and have no clue where to start at especially with boost in play. I have marks bin file loaded from the chip he burned for me.
I have watched some videos on youtube about tunerpro, but that still doesn't put me in the neighborhood of where i need to be at.... i learn fast so if you guys can explain things, ill post pictures and give you detailed information on how the car is running and what the wideband is saying.
Thank you so much for your help and this shall be a fun experience :D
PS: I do not have chips YET, but can i run a "tune" via the laptop without ostrich or chip swapping just to see how the car would react or would i need to burn chips every single time?