i have a 16196395 and am using a od bin from a 16197427 and i want to make sure i wire the pcm like a 16196395 and not a 16197427.
Printable View
i have a 16196395 and am using a od bin from a 16197427 and i want to make sure i wire the pcm like a 16196395 and not a 16197427.
The Mitchell's Manual wiring schematics I have do not show any wiring differences between the 16196395 and 16197427 for either 1994 or 1995. The Mitchell's Manuals show different wiring schematics for 4L60E and 4L80E transmissions only.Quote:
Originally Posted by bonnieclyde100
dave w
on the schematics off this site i found some differences on the E and F connector on 6395 f2 f3 has trans input speed high and low and the 7427 doesnt and 6395 has 4wd on f4 where 7427 has it on f8Quote:
Originally Posted by dave w
The 4L80E uses a Transmission Input Speed Sensor which is wired to F2 Transmission Input Speed Hi and F3 Transmission Input Speed Low. See attached pictures below.
The 4L60E does not use a Transmission Input Speed Sensor.
The 4L80E is either definition $OE or $31.
The 4L60E is either definition $E6 or $OD.
dave w
ok thanks for the help i wanted to make sure i would not burn out my pcmQuote:
Originally Posted by dave w