does anyone know where i can find the download? Im trying to connect to a 93 ecm. Im hoping to be able to reprogram it but anything would help.
Printable View
does anyone know where i can find the download? Im trying to connect to a 93 ecm. Im hoping to be able to reprogram it but anything would help.
TunerCat offers software for the 16191947 computer: http://www.tunercat.com/
You will need to purchase either the OBD1 Tuner Kit ($69.95), or the OBD1 RT (Real Time) Tuner Kit ($99.95), and purchase the $1F ECM definition file ($19.95).
Try these links below:
http://gearhead-efi.com/gearhead-efi/def/xdf/
http://www.tunerpro.net/downloadBinDefs.htm#GM
Sometimes I've needed both TunerCat and TunerPro to successfully tune some of the less popular computers like the 16191947.
dave w
ok. I found the xdf but not the adx file. is it the same as the bin file? also this is a 93 ecm. the info i found online was thats the definition file. i just noticed it shows it as a 94-95. not sure if it would cause this though.
You will need to "import" the .ads file http://www.tunerpro.net/gmOBDI.htm , then save as .adx.
dave
i understand that but i dont see a mask labeled as $F1
My apologies, I posted the wrong link try this link: http://www.tunerpro.net/gmOBDI.htm
You will need to know your engine code, for example LN2, LM3, LD2 ... LG0
dave w
so right now im running the a167 file which is correct for the ecm and im running the $F1 file. Ive tried the 3 different bins thats listed as well as all 3 bins. It shows that its connected but then flashes error and connected and error and keeps doing that. i also do seem to see any data.
What com port are trying to connect with?
dave w
i was trying to 5 which was a open port. I switched it to 2 and it made no change. also im not seeing any data be displayed. i also noticed this xds is for a 94-95. im not sure if thats causing the issue. mines a 93.
Do you have computer 16191947?
dave w
its the 16134847. same style of programming and both dont use a chip.
I found this old tread that might be helpful? http://www.gearhead-efi.com/Fuel-Inj...w-do-I-do-that (R.I.P Eagle Mark).
Maybe reload your USB ALDL Cable Driver: http://www.moates.net/usb-driver-p-215.html?cPath=78 I recommend plugging in the USB ALDL Cable into the laptop, then "RUN" CDM20824_Setup.exe directly from the website.
dave w
i tried using the same settings and adx as he had and im still getting errors and no data. now if i use efilive v4 it blinks data but doesnt stay connected for long which i believe is software related. in tunerpro i have nothing. i even reinstalled the drivers with no change.
Maybe the attached .adx file will help? I'm not sure what else I can do to help using a keyboard.
dave w
yes ive tried that already but still no luck. right now i got my chip burner for the 90 ecm to just burn a 93 program onto a 90 chip. i downloaded the bin but i dont have a xdf.