1 Attachment(s)
Starts then stalls ......
Thought I had gone over this thing bit by bit (no pun intended) , but I am obviously missing something as this is my first time combining .bin's , anyways :
454 (496) / 700R4 in my S10 Blazer , runs fine when up to temperature , 750 +/- rpm idle , good transition into and out of gear , all around good running .
Problem is when it sits overnight (+/- 35 degrees ambient temp ) it will start and immediately stall , two or three times or if you crack the throttle very slightly and it will run and idle like normal .
I imported the Fuel and Spark tables from BMHK (Manual $OE) to Fast355's BJYL-700R4 .bin ($OD), I did this as I liked the idle charicteristics of the BMHK but I needed $OD to run 93V8S10's dual fan code, so it is possible I missed a startup parameter during the transfer that is causing this , but I don't seem to be able to find it . Thought it might be looking for a P/N input at pin E5 ('7427 PCM) but no luck there .
Anyone that might look at the attached .bin and lend some pointers ?
Thanks in advance
TOM