PDA

View Full Version : ISO AEM Uego Wideband O2 Gauge



Chewy1576
12-23-2017, 06:30 PM
I want to replace the gauge that was stolen earlier this year so I can dial in the tune with 61 lb injectors. I still have the 02 sensor, but the gauge and wiring were ripped out with the ECM.

Chewy1576
02-19-2018, 11:03 AM
Bump. Still looking. Any wideband gauge with 0-5v output for data logging would work too. Just want to get back in to tuning this 383.

Six_Shooter
02-19-2018, 03:52 PM
Look at 14point7.com

They make inexpensive WBO2 systems. I use them nearly exclusively, though I do have an AEM Failsafe in one of my cars (because I got a decent deal on it) and have used Innovate and PLX in the past.

Chewy1576
02-19-2018, 04:31 PM
Look at 14point7.com

They make inexpensive WBO2 systems. I use them nearly exclusively, though I do have an AEM Failsafe in one of my cars (because I got a decent deal on it) and have used Innovate and PLX in the past.

The Spartan 2 looks promising. I can wire it to the EGR pin when data logging, and a gauge when not. I was looking at the PLX system also. Thanks for the recommendations.

Six_Shooter
02-19-2018, 11:00 PM
My experience with PLX was not a good one...

I never had problems with my Innovate controllers, but I sold them before I had a chance to have any problems. lol

14point7 has been solid for me for about 8 years, maybe longer.

Chewy1576
02-20-2018, 09:09 AM
Maybe I'll give it a try then. Hopefully the sensor I have is still in good shape.