GVroman
06-26-2021, 08:27 PM
Hello all, thanks for the add
My name is G, I am currently restoring a 1985 Jeep Grand Wagoneer with an AMC360 and TF727 transmission. As a part of this restoration, I am converting it to TBI with timing control using sensors from a 1990 5.7L C1500, a GM 1227747 ECU modified to accept 28-pin EPROMs, & the Moates Autoprom w/ TunerPro RT. My objective with this conversion is threefold:
1. Leave behind the frustration of the often troublesome carb
2. Optimize fuel mileage
3. (eventually) build custom bins for E85 and E85/gas mix (Why? Why not! Versatility is enough for me)
I am still very new to tuning and will definitely have questions as I learn more. Currently I am looking for .xdf, and .adx files to get setup with, as well as .bin files that would be good to experiment with.
Cheers!
My name is G, I am currently restoring a 1985 Jeep Grand Wagoneer with an AMC360 and TF727 transmission. As a part of this restoration, I am converting it to TBI with timing control using sensors from a 1990 5.7L C1500, a GM 1227747 ECU modified to accept 28-pin EPROMs, & the Moates Autoprom w/ TunerPro RT. My objective with this conversion is threefold:
1. Leave behind the frustration of the often troublesome carb
2. Optimize fuel mileage
3. (eventually) build custom bins for E85 and E85/gas mix (Why? Why not! Versatility is enough for me)
I am still very new to tuning and will definitely have questions as I learn more. Currently I am looking for .xdf, and .adx files to get setup with, as well as .bin files that would be good to experiment with.
Cheers!