PDA

View Full Version : 1999 5.3L vs 2004 5.3L (L59) PCM differences



53dawLsSwap
05-24-2021, 11:11 PM
Long story short, I have a PCM from a 1999 4.8/5.3 (Red/Blue connectors) and as of tomorrow will instead end up with a 2004 5.3L L59 engine which looks like uses the PCM with Blue/Green connectors. Will the PCM with Red/Blue function ok as long as I use a matching Red/Blue harness to connect to the 2004 5.3L? Reason I ask is I already bought a PCM with VATS deleted etc and a standalone wiring harness for the 1999, of which turned out to be a 4.8L (one of my many lessons learned as a newbie to these modern engines :mad1:).

Fast355
05-24-2021, 11:50 PM
Long story short, I have a PCM from a 1999 4.8/5.3 (Red/Blue connectors) and as of tomorrow will instead end up with a 2004 5.3L L59 engine which looks like uses the PCM with Blue/Green connectors. Will the PCM with Red/Blue function ok as long as I use a matching Red/Blue harness to connect to the 2004 5.3L? Reason I ask is I already bought a PCM with VATS deleted etc and a standalone wiring harness for the 1999, of which turned out to be a 4.8L (one of my many lessons learned as a newbie to these modern engines :mad1:).

As long as it has a return style fuel system and the same injectors it was calibrated for it will run. That being said the 04 is likely DBW and the 99 DBC.

53dawLsSwap
05-25-2021, 12:12 AM
As long as it has a return style fuel system and the same injectors it was calibrated for it will run. That being said the 04 is likely DBW and the 99 DBC.
Ok thanks. Right, I was going to swap just the BDW TB for the DBC TB, but perhaps swapping the complete intake would make most sense at this point? If I didn't have issues with the OBDLink for the bench harness I made, perhaps it wouldn't be as big of a deal.....but for now, am going to assume I won't be able to get my bench harness to work properly before I go to install the engine/transmission.

In-Tech
05-25-2021, 03:50 AM
The bench harness is the same for the blue/red(09-02) and blue/green(03-08)

53dawLsSwap
05-25-2021, 05:35 AM
The bench harness is the same for the blue/red(09-02) and blue/green(03-08)
Thanks. In general, is the Blue connector on both exactly same with only the Red/Green connectors being different? Just curious.

In-Tech
05-25-2021, 06:17 AM
Here ya go.

53dawLsSwap
05-25-2021, 07:35 AM
Here ya go.

Thanks!

In-Tech
05-25-2021, 08:03 AM
I wish I could give credit to the author. These docs have helped me many times.

Maybe it's this guy.
00035A50 3235 2030 206F 626A 0A3C 3C0A 2F41 7574 25 0 obj.<<./Aut
00035A60 686F 7220 2842 7265 6E64 616E 5061 7474 hor (BrendanPatt
00035A70 656E 290A 2F43 7265 6174 696F 6E44 6174 en)./CreationDat
00035A80 6520 2844 3A32 3031 3830 3432 3931 3732 e (D:20180429172
00035A90 3633 342D 3035 2730 3027 290A 2F4D 6F64 634-05'00')./Mod
00035AA0 4461 7465 2028 443A 3230 3138 3034 3239 Date (D:20180429
00035AB0 3137 3236 3334 2D30 3527 3030 2729 0A2F 172634-05'00')./