PlayingWithTBI
05-12-2021, 02:53 AM
I have some stuff that's been laying around for a couple years which I'll probably never use again.
1 - 1227747 ECM with a ZIF (Zero Insertion Force) socket that uses the SST 27SF512 flash chips (Done by Dave w).
5 - Blank SST 27SF512 flash chips
1 - Moates Burn 2 chip reader/flasher
1 - TBI Chips (Harris) Stage C Level 1 .bin I flashed on an SST 27SF512 chip for this ECM (from 12/27/18) I also added Highway Lean Cruise and EGR delete to it. I'll include the .bin file with it. It was suggested to use an 18LB spring in the TB. Disclaimer; use at your own risk, YMMV!
1 - Stock AMUS chip in its plastic holder and a spare holder (FYI the plastic holders are NLA) This chip is for a 5.7L with a 700R4 trans. This chip will go directly into a stock 7747 ECM (without the ZIF socket)
Asking $300 for everything.:happy:
1 - 1227747 ECM with a ZIF (Zero Insertion Force) socket that uses the SST 27SF512 flash chips (Done by Dave w).
5 - Blank SST 27SF512 flash chips
1 - Moates Burn 2 chip reader/flasher
1 - TBI Chips (Harris) Stage C Level 1 .bin I flashed on an SST 27SF512 chip for this ECM (from 12/27/18) I also added Highway Lean Cruise and EGR delete to it. I'll include the .bin file with it. It was suggested to use an 18LB spring in the TB. Disclaimer; use at your own risk, YMMV!
1 - Stock AMUS chip in its plastic holder and a spare holder (FYI the plastic holders are NLA) This chip is for a 5.7L with a 700R4 trans. This chip will go directly into a stock 7747 ECM (without the ZIF socket)
Asking $300 for everything.:happy: