Hi from west Virginia

[megajason]

I have a 94 trans am im tuning it has the lt1 im running nitrous with a window switch controlling it im tuning the car with the factory computer for now but going to a holley terminator this spring

[dave w]

:welcome:

Will the Holley Terminator "Play Nice" with the LT1 Opti Spark System?

dave w

[megajason]

No im gonna go 8 coil ls setup using the torqhead 24xsetup with the holley its kinda expensive but its a very reliable setup i dont use my car very often just nice days or when a neighbor wants to race

[dave w]

Is the Holley more expensive than the EFI Connection LT1/LT4 24x conversion? https://www.eficonnection.com/home/category/engine-hardware/crank-and-cam-signal-kits/efi-24x-product-line/efi-24x-lt1lt4
I very much like the fact that the EFI Connection system will uses the Factory '0411.

Several years ago, I had a Holley computer fail that would have cost $800 to replace. Since that point in time, I've never considered using a Holley computer or would I recommend a Holley computer to anyone based on my One Time Only failure.:mad1: Hopefully Holley has a better product now, but I'm not buying in to it.

I can easily find an affordably priced factory computer. :thumbsup:

dave w

[megajason]

You can do the 411 switch for about 300 the holly system is 999. And the torqhead is 600. Plus the coils its very expensive but the holly has a nitrous timer in it and my goal is twin turbos so im going holly to control all that the holly comes with a wideband so tuning is much easier

[dave w]

You can do the 411 switch for about 300 the holly system is 999. And the torqhead is 600. Plus the coils its very expensive but the holly has a nitrous timer in it and my goal is twin turbos so im going holly to control all that the holly comes with a wideband so tuning is much easier:thumbsup: