PDA

View Full Version : 12587603 bin file for cam swao



Tjmac
01-27-2021, 01:53 PM
Anyone have a start up file for a 2003 lm7 stage 2 cam swap for that OS?
considering doing that cam( e1840p)but need a starting file to run before tuning.any help greatly appreciated

In-Tech
01-27-2021, 05:29 PM
Hello,
Need to know what injectors, intake, TB, is engine stock besides valvetrain, which MAF, automatic or manual, cats, exhaust setup?

Tjmac
01-28-2021, 02:29 AM
Stock engine stock injectors ls1 intake factory maf sensor no cats dual exhaust 4l60e.going into a 68 firebird.not a racer just looking for a bit of rumble.not max power

In-Tech
01-28-2021, 04:56 PM
Hello,
Drive by wire or cable, rear end ratio and tire size(ie 275/45/17 or whatever)? See if you can see the injector part number too. Is the computer from your exact combo? Meaning, did you buy an engine/trans/harness/pcm combo? If so, please post a bin file and I'll make you a starting file.

Tjmac
01-29-2021, 03:45 PM
Hello,
Drive by wire or cable, rear end ratio and tire size(ie 275/45/17 or whatever)? See if you can see the injector part number too. Is the computer from your exact combo? Meaning, did you buy an engine/trans/harness/pcm combo? If so, please post a bin file and I'll make you a starting file.
i sent you a pm

In-Tech
01-29-2021, 06:23 PM
Yepper, thanks. I'll be posting the bin file here for others to start with since a starting file will help. Tuning "in person" is always better than the next guys "guestimate" lol. My guestimates from doing efi for over 30 years are pretty good, but still nothing like hands on to verify and make fine tune changes. :)

Tjmac
02-04-2021, 02:32 AM
Yepper, thanks. I'll be posting the bin file here for others to start with since a starting file will help. Tuning "in person" is always better than the next guys "guestimate" lol. My guestimates from doing efi for over 30 years are pretty good, but still nothing like hands on to verify and make fine tune changes. :)
Any luck with that file carl?

In-Tech
02-04-2021, 10:18 PM
Hiya,
Not yet, I'm buried busy but will try to post this weekend :)

Tjmac
02-24-2021, 11:53 AM
Have you had any time yet to assist me?if so let me know what you want for the file.i one's you my email address.ty

In-Tech
03-08-2021, 10:22 AM
Here ya go, modded starting file. Lotsa changes :)
Injectors 12594512
Cam change
Tire size 245/50/16
Gearing is 3:73

Tjmac
03-08-2021, 01:52 PM
Thank you so much!! You can man.kudos for your assistance

In-Tech
03-09-2021, 01:51 AM
Oh, also the fuel injector table is setup for a non vacuum fuel regulator.

Tjmac
03-09-2021, 03:24 AM
Great.I have a corvette returnless setup

trlrider
03-10-2021, 04:56 AM
Here ya go, modded starting file. Lotsa changes :)
Injectors 12594512
Cam change
Tire size 245/50/16
Gearing is 3:73

:rockon::thumbsup: