PDA

View Full Version : Need help finding a bin


nascar2496
06-14-2012, 08:57 PM
Hello,

New to the forum and tuning in general so cut me some slack :) I built an 86 iroc with a 305 TPI 5 speed manual trans. Borg warner 3.45 rear. I have the BCC AKFX 2427 for the 165 ecm. The closest one i could find is AKFT. Does anyone have the AKFX available for download? The car runs pretty good considering it has a mild cam, vette heads and full exhaust but it needs tweaking so i want to get the closest bin i can to what i already have. Any help would be greatly appreciated. Thank you!!
PJG1173
06-14-2012, 09:49 PM
your BCC may have been superseded. Maybe someone (EagleMark) can explain where they find out if its been updated.
EagleMark
06-14-2012, 10:33 PM
Well if you have it you can read it. But it was superseded (GM Upgrade for some reason) to ANPK so that would be a better start.
nascar2496
07-02-2012, 01:43 AM
Ah ok, Thank you. I will download that bin and see if i can find any differences (if any) and see if the car runs with that one.
EagleMark
07-02-2012, 02:24 AM
Sometimes a supercedded bin changes are not defined in the mask, therefore can not be found unless you read hex, dissasembly/hacks. But sure would be better start if GM found a reason to change it...
85Z28NOS
07-04-2012, 08:11 PM
I have a 88 305/5spd w/3.45 AKFY bin and was unable to locate it for download also. Wound up buying the moates adapter and reading it from my chip
EagleMark
07-04-2012, 08:45 PM
Well post it up and add it to the library! :thumbsup:
85Z28NOS
07-05-2012, 12:26 AM
here it is
Tunedperformance
07-05-2012, 03:19 AM
your welcome with the help on how too read ;)

File 'akfy.bin'
Address: 0xc000,0xffff
CRC: 0xb25b2c6e
Mask ID: 32b
ID byte: 0x32
Sum word: 0x70ef
Sequence: May 25, 1988 #4437 (05BC1155)
Scan ID: 2401
BCC: AKFY2436
EagleMark
07-05-2012, 03:50 AM
It is now in the 32b info thread, saved forever! :thumbsup:

Tunerperformance did I get all the corrections done you told me about?
Tunedperformance
07-05-2012, 05:18 AM
I will look it over soon mark, I have been busy. here is another to add ANYX .

http://www.sendspace.com/file/tsewa3
85Z28NOS
09-01-2012, 02:57 AM
did anyone ever get a copy of the ANYX bin? I am still unable to find a copy
Tunedperformance
09-01-2012, 08:15 AM
If mark didn't download it I can upload it again. Going too be out of town this weekend and can post on tuesday going to be on dial up. lol
EagleMark
09-02-2012, 02:35 AM
Mark is behind, wife has been in hospitasl for a month, another surgery monday, my laptop died yesterday... so help as you can and when things slow down to normal hectic I will catch up.
Tunedperformance
09-04-2012, 06:21 AM
You and you family are in our prayers Mark, hope all is well