ronfastway
09-12-2020, 04:34 AM
Hey everyone. Newbie to the whole LS thang. I have 2 projects going. Swapped a stock 5.3/4L60E/harness & PCM from a 2000 Silverado 2WD donor into a 1995 Chevy C1500 Stepside. Not running yet because I just haven't gotten back to it.
Currently working on a 6.0 LQ4 truck engine from a 2004 Silverado and a 4L80E from a 1997 Savana 2500 that's going into a slightly lowered 1998 Chevy C1500 Stepside. Going to try this setup first: 6.0, LS7 cam, 706 heads w/PAC-1218 springs, TBSS Intake with 92mm throttle body and headers backed with the stock 4L80. Going to use a 411 PCM and factory wiring harness. I've read that the LS7 cam is NOT ideal for this setup but I guess I'm going to find out.
Anyway...
Any input or advice is appreciated.
Currently working on a 6.0 LQ4 truck engine from a 2004 Silverado and a 4L80E from a 1997 Savana 2500 that's going into a slightly lowered 1998 Chevy C1500 Stepside. Going to try this setup first: 6.0, LS7 cam, 706 heads w/PAC-1218 springs, TBSS Intake with 92mm throttle body and headers backed with the stock 4L80. Going to use a 411 PCM and factory wiring harness. I've read that the LS7 cam is NOT ideal for this setup but I guess I'm going to find out.
Anyway...
Any input or advice is appreciated.