Newbie with alot of dumb questions on TBI tuning

[Fast95]

Ok, I have everything I need I think. I have my obd1 to USB(not motes), winaldl,tunerpro rt. Now I'm trying to data log on winaldl and not seeing my ecm 19167427 in the list so not able to log anything. I'm kinda lost at this point. This is on a 95 c1500 (my shitbox) I'm looking to swap in the 385 FB creat in the future, and really needing help getting my hardware and software set up. All info is greatly appreciated. This is probably posted in the wrong place, but I'm kinda retarded sooo

[dave w]

:welcome:

WinALDL does not support the 16197427 PCM. TunerPro RT will support the 16197427 PCM.

Gearhead-efi TunerPro RT files for the 16197427 are here: http://www.gearhead-efi.com/Fuel-Injection/showthread.php?303-16197427-PCM-Information-0D

dave w

[Fast95]

Thank you!! Now I have to get everything to jive with my cable and tunerpro rt, is there and good info on adding tools to tunerpro tools or will the cable work with out adding it as a tool? And is the 10k resistor still needed

[dave w]

TBI Does Not use 10K resistor.

Maybe YouTube works for you? https://www.google.com/search?q=tunerpro+rt+tutorial&rlz=1C1CHBD_enUS783US783&oq=&aqs=chrome.0.69i59l8.434395803j0j15&sourceid=chrome&ie=UTF-8#kpvalbx=_vkhOX6-jOqTt9AON5LCQBw23

dave w

[Fast95]

Ok, I'm over my hodgepodge setup I'll be ordering the autoprom kit in the next day or two and I will return with some information hopefully, I'm sure I'll have questions.