PDA

View Full Version : Looking for OS 12209161 for a 0411. 2002 Escalade with 6.0 and 4L60


DigitalHorsepower
08-27-2020, 08:35 PM
Hey group,

Thanks for the add!

Been tuning using TunerPro for years on the old GM TBI and Ford stuff as well as Honda's but after hearing about PCM Hacker and LS Droid decided to give it a shot, HP Tuners credits suck.

Have a friend who has a 2002 Escalade with the 6.0 and a prior shop tuned it and has since gone out of business. The P01 bricked on him in the middle of a HPT upload.

Trying to help him out and see if I can reset it back to factory OS and have him do the 2 bar conversion on it again then redo the strategy on my dyno.

I just can't seem to find 12209161 OS anywhere, anybody have a lead on that? I've checked a good number of the tune repositories and I'm not seeing it.

Any help would be great! Thanks!
B52Bombardier1
08-27-2020, 10:43 PM
I don't believe that a Tuner Pro RT XDF exists for 1220961 so it really doesn't matter if you find a copy of it. It will be better to find a different but close enough OS that does have XDF support and modify that. Without an XDF for 0961, you won't be able to edit it properly.

You also might find success at a GM dealership to reflash that bricked P01 PCM to the correct VIN if you really want to go in that direction.

Rick
Snoman002
09-02-2020, 03:44 PM
https://github.com/Snoman002/Engine-Tune-Repository-TunerPro-EFIlive-TunerCat

If you have the HPT tune you should be able to download a near year P01 OS and then table by table match it up between HP Tuners and TunerPro
THEFERMANATOR
09-03-2020, 06:40 AM
Are you sure on the operating system number? I couldn't even find that OS. Yhe 02 Escalade tune I have is a 2156 OS. I have an 0411 in the shop out of an 02 that I can try and check tomorrow.
Neukam
10-09-2020, 03:39 AM
Have a friend who has a 2002 Escalade with the 6.0 and a prior shop tuned it and has since gone out of business. The P01 bricked on him in the middle of a HPT upload.

Trying to help him out and see if I can reset it back to factory OS and have him do the 2 bar conversion on it again then redo the strategy on my dyno.

I just can't seem to find 12209161 OS anywhere, anybody have a lead on that? I've checked a good number of the tune repositories and I'm not seeing it.

If you're still looking for a bin, PM me the VIN of the vehicle and I can try to get the latest calibration from TIS2000 and upload it for you.