Mag
02-29-2020, 11:12 AM
Hello new to Tuner Pro RT :happy:
My car feels like its lean surging when going up hills and have recorded data using Tuner Pro RT..
I am new to Tuner Pro RT and just done data logging yesterday on my V6 and wondered if someone could look over my XDL file https://pcmhacking.net/forums/images/smilies/icon_thumbup.gif
I have changed those manifold gaskets (oil in the coolant) - spark plugs - cleaned throttle body and IAC - cleaned the MAF - checked all vac lines - leads checked ok with ohms readings and they don't arc anywhere at night in the dark with water misted over them.
Changed the ignition coils and module under neath them with a friends spares.
When the ALDL cable is plugged into the PC and car the check engine light comes on and 1 of the fans turns on, the engine coolant temp stops reading on the dash https://pcmhacking.net/forums/images/smilies/icon_wtf.gif
Engine is Stock with a Ryco Rush foam air cleaner and sport exhaust.
I don't think it's fuel pressure because when you put your foot down it goes very well, but can't see anywhere to connect a gauge too https://pcmhacking.net/forums/images/smilies/icon_cry.gif
If you view the data you will note when it gets lean the knock sensors start reducing the timing of the cylinders.
My car feels like its lean surging when going up hills and have recorded data using Tuner Pro RT..
I am new to Tuner Pro RT and just done data logging yesterday on my V6 and wondered if someone could look over my XDL file https://pcmhacking.net/forums/images/smilies/icon_thumbup.gif
I have changed those manifold gaskets (oil in the coolant) - spark plugs - cleaned throttle body and IAC - cleaned the MAF - checked all vac lines - leads checked ok with ohms readings and they don't arc anywhere at night in the dark with water misted over them.
Changed the ignition coils and module under neath them with a friends spares.
When the ALDL cable is plugged into the PC and car the check engine light comes on and 1 of the fans turns on, the engine coolant temp stops reading on the dash https://pcmhacking.net/forums/images/smilies/icon_wtf.gif
Engine is Stock with a Ryco Rush foam air cleaner and sport exhaust.
I don't think it's fuel pressure because when you put your foot down it goes very well, but can't see anywhere to connect a gauge too https://pcmhacking.net/forums/images/smilies/icon_cry.gif
If you view the data you will note when it gets lean the knock sensors start reducing the timing of the cylinders.