Wanted AVT cable and PCMs

[kur4o]

An AVT cable and PCMs are wanted for a new tool development.

AVT-852 USB cable is preferred.

The PCMs needed are
ls1 PCM 512kb and 1mb.
lt1 PCM 96-97
blackbox PCM 98-00
V6s 60* PCM 99-05
L4 pcm[ls1 style case]

Anyone that have an extra one of these and wants to borrow them or donate them are welcomed.

A special extra credit will be given to anybody that supports the project.

[1project2many]

I have a couple of PCM's including blackbox and LS1. Happy to loan/donate.

[dzidaV8]

I have a few PCMs lying around so I could help with testing, what is the project?

[jsimplex2]

I have a pile of 96-97 black box ones if you're interested playing with any of them, I also have a silver LS looking one I took out of a 2002 Bonneville I scrapped out had V6, lmk if any of those interest you

[kur4o]

Thanks to everyone for the support. I will send a pm with the shipping details.

The tool is supposed to be a eehack equivalent for those PCMs. It is still on the planning stage but can evolve to something much better. More details will be revealed later.

I know that the cable is expensive, but can assure that an extra care will be taken and it will be returned at the end of the project.

[dzidaV8]

kur4o, I already have working reflash kernel for LT1 OBD2 PCMs, I'm using PCMHammer fork for PC side, the plan is to make PCMHammer usable on all VPW enabled PCMs/ECMs, so maybe it would be a good idea to join effort?

[kur4o]

kur4o, I already have working reflash kernel for LT1 OBD2 PCMs, I'm using PCMHammer fork for PC side, the plan is to make PCMHammer usable on all VPW enabled PCMs/ECMs, so maybe it would be a good idea to join effort?

Most of the PCM side is already done, I still haven`t look at the 96-97LT1 PCMs. When we get there you will be of great help of what you have. Even that the VPW PCMs looks similar they have some small differences that makes one tool fit all almost impossible.