Long time member 1st post 3.4/3500 hybrid 88 s10

[duttonmatter]

Hello, I have learned alot from years of reading here and I just want to say THANKS! I have been and still working on an 1988 s10 4x4 3.4/3500 hybrid. She runs pretty strong but still need to figure some stuff out. Again thanks for the wealth of knowledge here. Hope I'm doing this right.

[Fast355]

Hello, I have learned alot from years of reading here and I just want to say THANKS! I have been and still working on an 1988 s10 4x4 3.4/3500 hybrid. She runs pretty strong but still need to figure some stuff out. Again thanks for the wealth of knowledge here. Hope I'm doing this right.

They do run pretty good. What are you using for ignition and engine management on that project? Years ago I figured out how to run mine on a 7427 using the stock 3.4 camaro DIS.

[duttonmatter]

I am using the stock DIS the camaro came with and 7730 $A1. Wish I would have tried that ecm so it would fit nicely behind the dash. This project has been going on for years with a lot of interruptions so I have to relearn some things. I got some gauge problems to fix and then I’ve got to figure out why it goes lean and stalls when I let off the gas under 180ish temp. When she’s at temp she sure is fun to drive. Btw what upper intake did you use? I went with the LNJ and just wondering what others did.