Bin file needed

[Dishmael]

I have a 1994 4.3 Vortec EGR Blocked off No Smog Equipment installed it has 1 O2 sensor 2 knock sensors 700r4 transmission. I really need a good Bin file for my application.
Original ECM is 16196395 Code on ECM is BHRJ the motor was originally paired with a 4l60E can anyone help me? I think I just need a Bin that will work with a manual transmission since I replaced my 4l60E with a 700R4 thanks

[dave w]

The .bin files from a 16197427 will work with 16196395. Link to 16197427 .bin files, http://www.gearhead-efi.com/Fuel-Injection/showthread.php?303-16197427-PCM-Information-0D
INCLUDING 4.3 .bin files.

dave w

[Dishmael]

thanks but I am not sure any of the Bin files there will work they all look like they are for a 4l60e and I have a 700r4 i don't see any for manual trans maybe I am missing it

[dave w]

BJFD 94 C-K Truck 4.3TBI 5 speed.BIN

dave w

[Dishmael]

My engine is a 4.3CPI

[dave w]

You have the option to make a custom chip by swapping parameters from the TBI 5 speed .bin into the CPI .bin file.

dave w

[Dishmael]

Thanks for the info I will need to talk with my friend he is the one that is burning the chip for me I know nothing about how to do any of this

[dave w]

There are programming parameters in the chip to use either a 4L60E or a 700R4.

dave w

[Dishmael]

how do I do that this is my first time trying to program a chip

[dave w]

how do I do that this is my first time trying to program a chip
There is a learning curve to programming chips. Using the correct .xdf definition file is necessary. The $OD link http://www.gearhead-efi.com/Fuel-Injection/showthread.php?303-16197427-PCM-Information-0D has the Fast 355 $OD 700r4.xdf file with 700R4 parameters.

dave w