Help needed LS6.0 to 700r4 which .bin .xdf

[SapperRE]

Hi Guys, I have managed to the the Bin file from my PCM a OS 12212156 which came with the LS 6.0 Engine I got from a scrap yard.

I also got the .xdf file for the 2002 GM Vehicle in this thread.

The original transmission is showing as a 4L80E but I want to use my 700R4 as this has very recently been fully rebuilt.

The 6.0 LS will be going into my 1989 GMC Vandura G2500 Van.

Am I able to just change to transmission type and then save or is it more complicated? to I need to change other settings aswell.

I need to delete VATS
EGR
Cooling fans
Probably the Speedometer section with wheel size etc.
Maybe the 02 Sensors aswell. (still reading up on whats needed).

Many thanks.

[Fast355]

Hi Guys, I have managed to the the Bin file from my PCM a OS 12212156 which came with the LS 6.0 Engine I got from a scrap yard.

I also got the .xdf file for the 2002 GM Vehicle in this thread.

The original transmission is showing as a 4L80E but I want to use my 700R4 as this has very recently been fully rebuilt.

The 6.0 LS will be going into my 1989 GMC Vandura G2500 Van.

Am I able to just change to transmission type and then save or is it more complicated? to I need to change other settings aswell.

I need to delete VATS
EGR
Cooling fans
Probably the Speedometer section with wheel size etc.
Maybe the 02 Sensors aswell. (still reading up on whats needed).

Many thanks.

You need a file from a matching operating system that has the transmission file you intend on running. I usually segment swap the mechanical automatic trans segment from a a 2002 8.1 school bus with an Allison AT545.

[SapperRE]

Hi thanks. I'm not familiar with the Allison AT is it also a non electronic?

[NISANDA]

Just disable all the transmission DTCs, it will run fine with you mechanical transmission and current motor.

[SapperRE]

OK I'll give it a go