WB to Blue Tooth Adapter

[eutu1960]

I am a little confused about hooking up my AEM WB to the 1320 electronics Blue Tooth adapter to data log, Do I use the Blue wire serial output or the White Wire 0-5v output, I know I need to hook one or the other to the RJ-45 cable but witch one for data logging this way. Thanks For any help.

[1320_john]

0-5v output to pon 1 of the rj 45 connector and you should be good to go.

[eutu1960]

0-5v output to pon 1 of the rj 45 connector and you should be good to go.

Thank You Hopefully I will have some time this week to play around with it.

[eutu1960]

Still no luck, I measured 1-5v on the white wire from the WB and hooked it to the orange white wire on the RJ-45 cable I have. I am assuming that the data should show on one of the AD Chanel's under ALDL Scan but I am not seeing anything. Is there some where else I should be looking. other than that the unit works very well, heres a very short log https://drive.google.com/file/d/0B5ds7R75XXuBLUZtbVY4Qy1ad05qUVFGNmdfN0NvZjJiQU9j/view?usp=sharing

[1320_john]

Set switches to 1 and 3 up, 2 and 4 down. That should get you there.

[eutu1960]

Set switches to 1 and 3 up, 2 and 4 down. That should get you there.

Thanks I will give it a try.

[eutu1960]

Set switches to 1 and 3 up, 2 and 4 down. That should get you there.

That worked, Big Thanks.