ebl flash 2 question

[Gary]

So as i browse and read i notice that people are referring to their ecu number as far as everything goes. Now since i replaced my ecu with the ebl flash 2 from Dynamic EFI what number would i use in reference?

[dave w]

Good question.

I think EBL or EBL Flash 2 would be a good name to use when posting.

Most members use factory computers, not very many members use Dynamic EFI computers.

dave w

[PlayingWithTBI]

I just ordered the EBL Flash 2 for my 88 C1500 7747 ECM. I'm going to have plenty of questions and a big learning curve. I found this thread on thirdgen.org going back years to last week, there's a lot of good info there.

https://www.thirdgen.org/forums/diy-prom/356351-tuning-ebl.html

[1project2many]

The EBL systems were based on C3 ecm's for years. 1227747 is one of many part numbers that would apply. Bob has created EBL for the P4 ecm family as well so the 1227730 and similar numbers may be included. You may have to contact Dynamic EFI to determine which OEM number your ecm should be listed under.