Npohl545
03-03-2019, 08:59 PM
So I purchased DataPro to datalog my 93 corvette and I couldn’t find any instructions anywhere. I have the Moates ALDL cable setup (not sure if the little switch should be in the 10 ohm position or open). Anyway, I tried to do a datalog on my way to work this morning. When I turned the car on the selected PID’s showed up and were active. I had selected “record” then pressed start and went driving, thinking I was logging information. When I hit “stop” it stopped, but I didn’t get any pop up asking me if I wanted to save the log anywhere or anything like that.
Is there anyone who wouldn’t mind giving me a “DataPro for dummies” crash course so I can get some logs to send to my tuner?
One thing I did do is select the Y93 (or something like that since I have a 93 y body). I don’t know if that was the right thing to do or not. Any help anyone could give me would be greatly appreciated. Thank you.
Is there anyone who wouldn’t mind giving me a “DataPro for dummies” crash course so I can get some logs to send to my tuner?
One thing I did do is select the Y93 (or something like that since I have a 93 y body). I don’t know if that was the right thing to do or not. Any help anyone could give me would be greatly appreciated. Thank you.