1996 corvette bin files needed

[barchetta]

Ive soldered in sockets but need the bin files. I found set on here but the car wouldnt start so would like to know if someone has a set or where I could find them. Can I get them from GM's site somehow?

[Terminal_Crazy]

Hi
I'm certain you'll need to flash the roms with an image first before you can connect through the PCM.

The images seem to be scrambled a little... I guess the address / data pins are swapped over to make things difficult to view.
I never did figure out how / where.

I do have stock 1995 T & E side Flash Rom Images.
I have others I think but these work on a 16188051 LT1 PCM.

email me - TerminalCrazy at sand-hill.uk and i'll post them over

Mitch

[barchetta]

Sent email and willing to try 95 but mine is a 96 OBDII.. but if I can boot and communicate maybe I can send m jet DST tune to it and make it work.

[Terminal_Crazy]

appologies, that should have been Terminal_Crazy at sand-hill.uk

[kur4o]

You can contact tunercat and ask for the raw bin files for 96-97 PCM.

When you recover the PCM can you please read the raw bins and post them here with a picture of the chips used. It will be good to have them available if needed.