New guy from 60degreev6.

[pocket-rocket]

Hello!

I'm new to this forum, but not forums in general. I'm mostly active on www.60degreev6.com (http://www.60degreev6.com).

I've been around tuning for a while, but am just now getting into learning to tune my own vehicle. I have a 92 Chevy Lumina Z34 with the 3.4l DOHC (LQ1) and a Getrag 284 5 speed. It has the '9396 ECM and I'm using a home built ALDL cable that I installed into the center console to scan with, and a Moates Ostrich 2 for programming.

Thanks for your patience and wisdom :)

http://i143.photobucket.com/albums/r148/Tasios77/Picture072crop.jpg

[EagleMark]

:welcome2:

Glad to see you stop by!

:welcome:

[RobertISaar]

Jon, welcome to possibly the best kept secret on the net.

be sure to post pictures of LQw1n, these guys LOVE our sideways engines! :laugh:

[pocket-rocket]

Jon, welcome to possibly the best kept secret on the net.

be sure to post pictures of LQw1n, these guys LOVE our sideways engines! :laugh:

Should I tell them it's got 4 cams and exhaust manifolds that will outflow those of a 350 even on a bad day?

[EagleMark]

Should I tell them it's got 4 cams and exhaust manifolds that will outflow those of a 350 even on a bad day?Yes, then it would be cool! But still don't see how to get a driveline in if it's sideways? :laugh:

[dave w]

:welcome:

dave w

[fasteddi]

:thumbsup: Welcome aboard. This forum is the best there is im my opinion, for any tuner/gearhead!

[1project2many]

Welcome.

I'll see your exhaust manifolds and raise you a set of mud tires on forced induction!
:)

[pocket-rocket]

Hopefully I'll be raising you a FI setup, but the mud tires I'll save for my Ranger ;)

Thanks for the warm welcomes fellas :)