Copying Factory .BIN from 1227727

[69ssMT]

How would I go about copying the actual BIN file from my ecu? I'm not interested in using a modified file someone created right now. The only thing I can find in tunerpro is
XDF->Import->From ECU...

But this doesn't appear to be actually copying the BIN file from my ecu; it just opens a folder on my computer to select one from there.

Thanks

[1project2many]

In order to copy the .bin you need to remove the memcal from the ecm and place it in a chip reader / programmer to read the file. Do you have a chip reader available?

Alternatively, you can check the four letter BCC and download a stock file to work with. However you will need an emulator or a chip programmer in order to make the ecm use your changes.

[69ssMT]

Thanks for clearing that up. I currently do not have a programmer. I'm very new to this and was wanting to do a little more research before purchasing one. I have my eyes on the "APU1" unit. I'm definitely open to any suggestions you guys might have though. Thanks.

[dave w]

There is the option of using the following for a 1227727:

Burn 2 https://www.moates.net/burn2-chip-programmer-p-197.html

G1 Memory adapter http://www.moates.net/g1-memory-adapter-tpi-etc-p-32.html

27SF512 Chips http://www.moates.net/c2-sst-27sf512-chip-p-39.html

To read the Original Memcal with a Burn 2 requires using the HDRT Memcal Header http://www.moates.net/hdr1-memcal-header-p-52.html?cPath=64 (likely a one time use)

The Burn 2 can not program the original Memcal

dave w