JeepsAndGuns
05-29-2018, 12:13 AM
Having a fire sale on a lot of stuff I have laying around from projects that will no longer happen, I am cleaning house.
Three 1227727 ecm's with memcals, a shot length of wire, wire cover, and mounting bracket. All from FWD V6 cars. $50 each shipped to the lower 48. SOLD
Two 12200411 ecm's. One has no wire/pigtails, but has the mounting bracket, the other has the wiring, but no mounting bracket. $70 each shipped to the lower 48. SOLD
Three 16197427 ecm's with memcals. No wiring or pigtails. $50 each shipped to the lower 48. SOLD
Vortec throttle body. Nice and clean, comes with a extra throttle blade that can be swapped in to replace the original one with the large air deflector. Make offer.
Holley 4 barrel throttle body. Unknown if the injectors or sensors are any good. The fuel pressure regulator is missing the diaphragm. I was going to remove the injector pod and use it with MPFI, but used a mono blade TB instead. $150 shipped to the lower 48.
If you want to buy all the ecm's as a lot, I would do $400 shipped for all.
FWD V6 ignition coils and DIS module, still on the mounting bracket. Make offer.
Vortec/LS coils. Both sides with mounting bracket. One clip is missing that holds the large connector on one side. $100 shipped to the lower 48. SOLD
Best way to contact me is by PM.
https://farm2.staticflickr.com/1732/41693583704_a546edc549_b.jpg
https://farm2.staticflickr.com/1737/27546329307_86127fca56_b.jpg
https://farm2.staticflickr.com/1744/41693587534_2ea3c9d071_b.jpg
https://farm2.staticflickr.com/1733/28543883488_23a8119173_b.jpg
Three 1227727 ecm's with memcals, a shot length of wire, wire cover, and mounting bracket. All from FWD V6 cars. $50 each shipped to the lower 48. SOLD
Two 12200411 ecm's. One has no wire/pigtails, but has the mounting bracket, the other has the wiring, but no mounting bracket. $70 each shipped to the lower 48. SOLD
Three 16197427 ecm's with memcals. No wiring or pigtails. $50 each shipped to the lower 48. SOLD
Vortec throttle body. Nice and clean, comes with a extra throttle blade that can be swapped in to replace the original one with the large air deflector. Make offer.
Holley 4 barrel throttle body. Unknown if the injectors or sensors are any good. The fuel pressure regulator is missing the diaphragm. I was going to remove the injector pod and use it with MPFI, but used a mono blade TB instead. $150 shipped to the lower 48.
If you want to buy all the ecm's as a lot, I would do $400 shipped for all.
FWD V6 ignition coils and DIS module, still on the mounting bracket. Make offer.
Vortec/LS coils. Both sides with mounting bracket. One clip is missing that holds the large connector on one side. $100 shipped to the lower 48. SOLD
Best way to contact me is by PM.
https://farm2.staticflickr.com/1732/41693583704_a546edc549_b.jpg
https://farm2.staticflickr.com/1737/27546329307_86127fca56_b.jpg
https://farm2.staticflickr.com/1744/41693587534_2ea3c9d071_b.jpg
https://farm2.staticflickr.com/1733/28543883488_23a8119173_b.jpg