TunerPro RT not logging WB O2

[Dom]

Need help. Finally got a wide band o2 sensor installed (MTX-L 0v = 7.35 5v = 22.39 AFR) connected to Pin 16 on my ecm. The hard ware is working.
Made math adjustments in TunerPro RT ADX file but i must be missing something, tunerPro don't see anything in the wide band o2 log. atached is the ADX file

[Dom]

After making changes to my bin file for the egr that is listed in the notes, I started getting some readings. The readings are in the 400 rang witch is way off.

[Six_Shooter]

Typically the ADX needs to be modified to calculate WBO2 data correctly.

[Dom]

ADX file was modified to WBO2 (X*3.008+7.35, X=V). Non modified ADX file gets closer with X*0.039063+10. Something is messing with X value. I tried X*0.03008+7.35 and gets me close, but don't add up. Where is the place to view X value?

[Dom]

Up date, 0.03008 is my original number, double that 0.06016 makes better math and will match the gauge at about 14.31 AFR. End equation X*0.06016+7.35. I will need more testing to check the slope.