ISO AEM Uego Wideband O2 Gauge

[Chewy1576]

I want to replace the gauge that was stolen earlier this year so I can dial in the tune with 61 lb injectors. I still have the 02 sensor, but the gauge and wiring were ripped out with the ECM.

[Chewy1576]

Bump. Still looking. Any wideband gauge with 0-5v output for data logging would work too. Just want to get back in to tuning this 383.

[Six_Shooter]

Look at 14point7.com

They make inexpensive WBO2 systems. I use them nearly exclusively, though I do have an AEM Failsafe in one of my cars (because I got a decent deal on it) and have used Innovate and PLX in the past.

[Chewy1576]

Look at 14point7.com

They make inexpensive WBO2 systems. I use them nearly exclusively, though I do have an AEM Failsafe in one of my cars (because I got a decent deal on it) and have used Innovate and PLX in the past.

The Spartan 2 looks promising. I can wire it to the EGR pin when data logging, and a gauge when not. I was looking at the PLX system also. Thanks for the recommendations.

[Six_Shooter]

My experience with PLX was not a good one...

I never had problems with my Innovate controllers, but I sold them before I had a chance to have any problems. lol

14point7 has been solid for me for about 8 years, maybe longer.

[Chewy1576]

Maybe I'll give it a try then. Hopefully the sensor I have is still in good shape.