PDA

View Full Version : TunerPro help for 1994 Chevy Cavalier



KC5UEA
11-27-2017, 06:48 PM
Hi all,

Just bought myself a 1994 Cavalier and have been searching for the .adx & .xdf files for TP5 without much luck.
I HAVE found an .xdf for a 1995 Cavalier that I believe would work as it is for the LN2 2.2l I4 that should be the same as my '94.
If so, then all I would need is a corresponding .adx to datalog the car.
SO, any help, either pointing to a pre-existing file, or help on creating one as I am new to this part and have never made one before, would be much appreciated.

Thanks in advance,

Mike.

dave w
11-28-2017, 04:08 AM
Try this this link: http://www.tunerpro.net/gmOBDI.htm Maybe A269

dave w

Six_Shooter
11-28-2017, 06:15 AM
'94 and '95 ECM are very different and won't be the same XDF, or ADX.

*Edit* Thinking of wrong engine for recommending an ADX.

KC5UEA
11-28-2017, 06:53 AM
Dave W and Six Shooter;

Thanks for the responses. I have yet to pull the PCM out from behind the glovebox, so I am unsure exactly WHAT the PCM is or what PROM it has.
I hope to do so tomorrow, then I'll better know which files SHOULD work and/or be close enough to modify for my application.
I fully understand that the 1995 PCM may have a different mask than the 1994 - I KNOW that such is the case with the 1994 Jimmy that I had; the previous years used different BCC's than the BHRJ in mine.
Now to DL the suggested files an have a go with TP in the car!

Mike.

KC5UEA
11-29-2017, 02:10 AM
Pulled PCM today.
This is what I found:

16191947 BJLT

Mike

1994 Chevrolet Cavalier
LN2 2.2l I-4
3-Spd Auto Trans