Help for v6 3800 of France !!!!

[cc21]

My name is claude I am 55 years old and I live in France in Burgundy and I am passionate about kit car.
I am currently working on a project with GM 3800 V6 engine serie 1 L27 NA 1995 and I am looking for a solution to realize a simple harness to run this engine, I do not know which ECM to use because it will be used with a manual box
Maybe someone of you can help me
thanks a lot for your help

Excuse me for my poor english:rolleye:

[Tom B.]

Bonjour Claude,
The simple harness can be crafted easily from a factory harness from a junk yard. The computer can be configured for the manual transmission without much difficulty. I have included 2 links for you to view a Buick with similar modifications. I can assist you with sourcing parts and computer tuning.

http://www.lesabret.com/ https://www.youtube.com/watch?v=FaKNPjPU4fE

[cc21]

Hello Tom

Thanks a lot for your help.
The engine I had was installed on a pontiac trans sport with automatic transmission, I also have the ecm 16184247
This ecm can be used with the manual box ?

[Tom B.]

Yes, the ecm is compatible.

[cc21]

I found a little information on a forum fiero but some information from the automatic box I miss to run ecm

http://www.gmtuners.com/files/94-95_C-H-G-U_3800_S1_PCM_Fiero.pdf