how do I get "calculated airflow" in place of "prom id" with a 16197427 $OD

[camaro354]

I have read the forums a few times but I still do not quite understand how to accomplish this. Want to be able to monitor/record the calculated airflow so I can dial in some areas on my tune. I have gone thru the link below and searched around but I just keep getting lost in the where's and how's of the code.

http://www.gearhead-efi.com/Fuel-Injection/showthread.php?4647-Calculated-AirFlow&highlight=Calculated+airflow+prom

If anyone was willing to help with a step by step it would be greatly appreciated.

[sturgillbd]

I'll have to look back at how I did it. Will try to send some screenshots of what to change in the bin. May be tomorrow eve before I get a chance to post anything.

[sturgillbd]

Make the changes in your bin as follows:
Change $4000 to 00
Change $4001 to 00
Change $51F0 to 02
Change $51F1 to 55

Use the following ADX file or look at mine to figure out how to modify your ADX file.

Brian

[camaro354]

Brian, thank you for going above and beyond!! It is much appreciated.