Riddle Me This ?

[dktool]

Hardware / Software:
Burn2, Moates chips and TP RTV5

When I try to read out and save to file a bin currently running good, it results in corrupted, bs data.

What I do;
remove chip from pcm, open Flash N Burn, place chip in Burn2, hit "read program" hit "save buffer to file" give it a name and "save"

Open TP, open that "saved as" bin and it is all crap data, what am I doing wrong or what is the problem with hardware or software ?
I have had no issue making changes to a bin and burning and running, just in doing the reverse action.

Thanks !

[myburb]

I use APU and not burn but assume presentation on TP is similar. Before I save I always do a compare chip to buffer. That should shaw any differences.

[dktool]

I use APU and not burn but assume presentation on TP is similar. Before I save I always do a compare chip to buffer. That should shaw any differences.

I always do the verify chip w/ buffer when I burn but not when I read a chip to save to pc, I will try that.