Exhaust clamps

[gregs78cam]

I bought a set of exhaust clamps quite a few years ago (10+) from a local place, I have been really happy with them because frankly they are awesome, they don't bend, and they are extremely easy to install, and i have been useing them with the same copper gaskets for those same 10+ years, taken them on and off many times. They were cast iron or cast steel, not sure which. A few years ago one broke an ear so I made a suitable copy from cold rolled steel. I have been scouring the interwebs for some more, and have had no luck. Attached is a SolidWorks model I made of what they look like. They are three identical pieces about 1" thick that fit together like this.......Has anyone seen anything like this?

http://www.gearhead-efi.com/Fuel-Injection/attachment.php?attachmentid=1824&d=1331012101

[1project2many]

Our local exhaust guy sells those. They're designed to go around an exhaust pipe that's already on a vehicle. I'll try to get more information.

[93V8S10]

Interesting. Does it take two of those per joint?

[one92rs]

so what clamps those down on the pipe.

[gregs78cam]

Interesting. Does it take two of those per joint?
Yes it takes 6 pieces per pipe.


so what clamps those down on the pipe.
You put one set on each side of the collector joint.