davidneson
04-14-2017, 01:54 AM
Hey guys i recently built my first lt1 and i am lost when it comes to tuning. I already have Tunerpro and a ALDL cable. I also Use EEHACK to flash my bins i have messed with and also use it to data log. I understand most of the functions of tunerpro. i am using stevos EEX.xdf for my parameter tree . I have changed constants and a few otheer things but not too much of anything else. My engine is a LT1 .30 over with 11.5 to 1 compression. Heads have been ported and a 2" intake valves installed by a local machine shop with 5/8 stud and gm performance guide plates , i paid the guy $700 so i hope they flow pretty good and they looked really good. All topped off with comp cam gold 1.5 roller rockers and 7.000" trick flow push rods. the cam is a cc 306 with LS7 roller lifters. Here is my bin if someone wants to take a look at it.