EagleMark
03-01-2012, 08:40 PM
Trying to understand what I see and why. If you've been reading the other thread you'll know why...
So lets take for instance BPW in $42 XDF has a location of "0x2B4" When I open the hex editor in TunerPro I can scroll down and find 0x2B0 then a row of numbers. So you would figure that 4 would be the fourth set of hex. But when you make a change to BPW at 0x2B4 it changes the fifth hex?
http://www.gearhead-efi.com/Fuel-Injection/attachment.php?attachmentid=1798&stc=1&d=1330623377
May as well add a TunerPro tip here too. If you open all your scalers, bitmasks and tables in Parameter tree, then open hex editor and click on a hex digit it will highlight the parameter. See highlighted BPW in parameter tree!
So lets take for instance BPW in $42 XDF has a location of "0x2B4" When I open the hex editor in TunerPro I can scroll down and find 0x2B0 then a row of numbers. So you would figure that 4 would be the fourth set of hex. But when you make a change to BPW at 0x2B4 it changes the fifth hex?
http://www.gearhead-efi.com/Fuel-Injection/attachment.php?attachmentid=1798&stc=1&d=1330623377
May as well add a TunerPro tip here too. If you open all your scalers, bitmasks and tables in Parameter tree, then open hex editor and click on a hex digit it will highlight the parameter. See highlighted BPW in parameter tree!