help choosing a bin file.

[beamsjr]

I seem to be having a hard time wrapping my head around the files I need to get to program my PCM. I understand that the bin is the actual code that is programmed to the memcal, but I am not sure of how I would go about choosing the one I need.I read to not be concerned with the Letter code ex: "BJYK" because you can burn to whatever you want. As long as I have a memcal from a vehicle with the same amount of cylinders as and close in motor size. I should be good here as I have a memcal from a 4.3 v6 going on to a 4.2 amc 258. I see some of the Bin files have transmission numbers in them. By the research I have done It sounds like I have a T999 transmission that works off the throttle linkage for shifting and I would want to use a Bin that I am able to disable "e" so that the computer thinks it is a manual transmission. However I am having a difficult time finding any information on how to do this.I am not really sure of how to pick the correct ads and xdf file I need once I have selected a bin file. I feel like I have a good Idea of what I need to do, but I have no idea of where to start with the files. I know there are probably many threads explaining this, and maybe all I need is for someone to point me to one of those threads?Any help would be greatly appreciated

[steveo]

does your transmission have electric lockup on it?

might be nice to pick an automatic bin so lockup can be controlled by the ECM.

other than that, yeah, a manual bin should be alright.

some people want park/neutral switch too, for idle in gear and out of gear control... manual bin wont give you that

[babywag]

Since the trans. is old school, you can modify an auto .bin with setting the manual flag, but I would start with a manual .bin
Throttle & idle code/settings will be better if you start with a manual trans. .bin

Assuming this is a Jeep, and you're using a 16197427 stick with the 4.3 $OD files, and matching .adx/.adf for TunerPro.
http://www.gearhead-efi.com/Fuel-Injection/showthread.php?303-16197427-PCM-Information-0D

[beamsjr]

This is a Jeep, and I am using a 16197427.

I am not sure about the electric lockup on the trans, but I will look into it.

So I think I will give the following files a go.

Advanced $0D TP5 v251.xdf
Advanced $0D v200.xdf
BJFD 94 C-K Truck 4.3TBI 5 speed.BIN

Does this seem correct, or is there better choice?

[babywag]

If it is a TF999 no electric lockup...non OD old school 3 speed auto.

What year/model Jeep?

[beamsjr]

Ok, that's what I thought. It's a 1985 cj7